hero-01-five-axis
TAKE-OUT ROBOTS
01 / EUR900WDY-S5

Manipulators for every press size

3-axis and 5-axis servo take-out arms, 10-15 kg payload, AC servo drive, for 50-550T machines.

hero-04-3in1-dryer
3-IN-1 DEHUMIDIFYING DRYERS
02 / YXD-550

Dry, dehumidify and load in one unit

Honeycomb rotor dryers from 50 kg capacity, for PA, PC, PET and ABS.

hero-03-auxiliary
BESIDE-THE-PRESS GRANULATORS
03 / 1.5 kW - 100 kW

Reclaim sprues at the machine

Single-shaft cutting chambers with alloy steel blades, 1.5-100 kW drives.

hero-05-mold-temp
MOLD TEMPERATURE CONTROLLERS
04 / Oil / water type

Hold mold temperature, cut cycle time

Oil and water type controllers with electric heating, 220 V models available.

hero-02-three-axis
3-AXIS SERVO ROBOTS
05 / AT1700WSY-S3

Standard take-out, 24/7 duty

AT and WIN series, 220 V control, single or dual arm, retrofit onto existing presses.

Export packing · FOB / CIF / DDP
1-year warranty · spare parts support

INJECTION MOLDING AUTOMATION

Take-out robots built to your press

Kunshan Thinkrobot supplies 3-axis and 5-axis servo take-out robots, collaborative manipulators and auxiliary equipment for 50-550T horizontal injection molding machines. 34 models online, 11 categories, OEM builds on request.

AC servo on every axis
Spare parts and remote support
OEM and design service
5-axis-servo-robot-mechanical-01
FEATURED ROBOT
5-axis servo take-out robot
Request a quote

Deep-cavity and multi-cavity molds, strokes and grippers matched to your mold.

Press range
50-550T
Payload
10-15 kg
Warranty
1 year

5-axis servo take-out robot mounted on an injection molding machine

5-axis servo / 50-550T presses

At a glance

34 models online, 11 categories, one factory

Every model on this site is built in Kunshan and shipped with export packing. Sizes and strokes are matched to your press before the order is released.

34
Models online
11
Product categories
50-550T
Press range covered
1 yr
Standard warranty

BUYING FROM THINKROBOT

What comes with every robot

The same standards apply to standard models and OEM builds, from design through export packing.

01 / OEM BUILD1

OEM and design service

Non-standard strokes, grippers and control logic built to your mold and cycle.

STROKES / GRIPPERS / CONTROL
View product range
02 / AFTERSALES2

Spare parts and remote support

Free replacement parts and online technical support on standard models.

PARTS / REMOTE SUPPORT
Talk to support
03 / EXPORT3

Export packing and terms

FOB, CIF, EXW and DDP terms, with export packing sized for sea freight.

FOB / CIF / EXW / DDP
Request a quote

Shop the edit

Selected models from the catalog

Start with the models buyers ask for most: 5-axis take-out robots, beside-the-press granulators, 3-in-1 dehumidifying dryers and mold temperature controllers.

Every listing states the press range, stroke and payload we can confirm. Drawings and electrical data are issued with the quotation.

View all products
03-scene-install

INSIDE THE FACTORY

Built in Kunshan, dry-cycle tested before packing

Each robot is assembled, fitted with the gripper and run through a take-out cycle before packing, so alignment is verified before the unit leaves the floor.

Dry-cycle test before packing

Every unit runs a full take-out cycle on the bench before it is packed.

Gripper and stroke matched to your mold

Grippers, strokes and control logic are set against your mold and cycle time.

Export packing with sea-freight bracing

Crates are braced and sized for sea freight, with FOB, CIF, EXW and DDP terms.

See the product range

Buyer questions

Questions buyers ask before they place the order

The questions we get most from molders and integrators, from axis choice to retrofit and lead time.

Still need an answer? Send the press tonnage and mold height and we will reply with a configuration.

Contact

Tell us the press tonnage and mold height

Send the machine model, tonnage and part weight. We reply with a configuration, price and freight option.

Email
yukijiang68@gmail.com
Phone
+86 18137003188
Office
Gangpu road, Zhangpu Town, Kunshan City, Jiangsu Province
Hours
Mon-Fri, 9:00-18:00 CST

Inquiry intake

Send the details

Send the machine model, tonnage, mold height and part weight so we can size the robot, gripper and packing.

0/120
0/1200